Page 3 of 3
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by giulia.roberts4
Ran into exactly this myself.
Remote work remains genuinely limited for most hands-on humanoid hardware roles, given the need for physical access to robots and test environments, though software-only roles (simulation, perception algorithms, offline learning) increasingly do offer remote or hybrid arrangements.
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by nschmidt
@giulia.roberts4 That's the official framing, at least - reality tends to lag a bit.
A commonly cited skill gap in new-grad applicants is practical systems integration experience - many candidates are individually strong in ML or in mechanical design, but comparatively few have hands-on experience getting perception, planning, and control to work together reliably on real hardware under time pressure. Transitioning from industrial automation into humanoid-specific roles is a increasingly common and viable path, since a lot of the underlying skills (motion control, safety systems, real-time software) transfer directly, even though the specific dynamics and learned-control components are new.
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by rivera14
@nschmidt Pretty much this. One thing to add:
The common academic path into this field is a master's or conversion course in robotics or machine learning, followed by an internship or research role at a known lab or company - a PhD is common but increasingly not strictly required for industry roles, especially on the applied engineering side. In the UK, base salaries for robotics roles reportedly range from around £50,000 for new graduates up to roughly £200,000 for senior whole-body-control or reinforcement-learning specialists - a notably wide band reflecting how specialized the top end of the field has become.
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by freya.smith
@rivera14 Minor factual note:
Robotics engineers in the US were reportedly seeing $150k-$205k total comp at mid-level and $205k-$300k at senior level in 2026, with humanoid- and foundation-model-specialist roles clearing $280k-$475k - a meaningful premium over general robotics/automation roles. Active employers hiring specifically for humanoid-relevant roles span both established robotics companies (Shadow Robot, Engineered Arts, PAL Robotics) and the newer venture-funded players (Figure, 1X, Apptronik, Sanctuary AI, Boston Dynamics' electric Atlas program) - each with different team sizes, cultures, and hardware-vs-software emphasis.
Totally unrelated but has anyone else noticed how fast component costs are dropping this year.
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by nancy_lewi
Slightly off-topic, but related:
Robotics engineers in the US were reportedly seeing $150k-$205k total comp at mid-level and $205k-$300k at senior level in 2026, with humanoid- and foundation-model-specialist roles clearing $280k-$475k - a meaningful premium over general robotics/automation roles. A field-deployment or reliability engineer's day-to-day work leans much more toward diagnosing real-world failure patterns, managing spare-parts logistics, and working directly with the customer site than toward algorithm development - a genuinely different role than a lot of new grads expect going in.
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by chloe.harris7
@nancy_lewi Same conclusion I've come to. Also worth noting:
RSS (Robotics: Science and Systems), ICRA, and the IEEE-RAS Humanoids conference are commonly cited as the most directly relevant venues for someone specifically interested in legged locomotion and humanoid control research, as opposed to broader AI/ML conferences.
Makes me wonder how this looks in another five years.
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by giulia.roberts4
@chloe.harris7 From hands-on experience,
24/7 factory-pilot support roles (the engineers keeping a deployed fleet running through real shifts) reportedly carry a real burnout risk, since they combine the unpredictability of early-stage hardware with the operational pressure of a live production environment. Companies like Figure, 1X, Apptronik, and Agility Robotics are reportedly pulling senior ROS, controls, and learning engineers directly out of warehouse-automation and industrial-robotics roles - a sign of real talent competition between adjacent industries, not just fresh grads entering the field.
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by deborah59
@giulia.roberts4 This matches what I've seen too.
Remote work remains genuinely limited for most hands-on humanoid hardware roles, given the need for physical access to robots and test environments, though software-only roles (simulation, perception algorithms, offline learning) increasingly do offer remote or hybrid arrangements. Robotics engineers in the US were reportedly seeing $150k-$205k total comp at mid-level and $205k-$300k at senior level in 2026, with humanoid- and foundation-model-specialist roles clearing $280k-$475k - a meaningful premium over general robotics/automation roles.
Re: How do you talk about a DIY robotics project convincingly in an interview?
Posted: Sun Aug 30, 2026 11:59 am
by young58
@deborah59 Minor factual note:
RSS (Robotics: Science and Systems), ICRA, and the IEEE-RAS Humanoids conference are commonly cited as the most directly relevant venues for someone specifically interested in legged locomotion and humanoid control research, as opposed to broader AI/ML conferences.