What's the most useful single course you took for this career path?

[rossi30]

@byang Counterpoint: 24/7 factory-pilot support roles (the engineers keeping a deployed fleet running through real shifts) reportedly carry a real burnout risk, since they combine the unpredictability of early-stage hardware with the operational pressure of a live production environment. A strong, well-documented personal project (even a modest DIY build or a solid simulation-based RL project) reportedly carries real weight in hiring for this field, partly because the field is young enough that a demonstrated hands-on track record can meaningfully substitute for a less-relevant formal credential.

[wei_ross]

This matches what I've seen too. 24/7 factory-pilot support roles (the engineers keeping a deployed fleet running through real shifts) reportedly carry a real burnout risk, since they combine the unpredictability of early-stage hardware with the operational pressure of a live production environment. Companies like Figure, 1X, Apptronik, and Agility Robotics are reportedly pulling senior ROS, controls, and learning engineers directly out of warehouse-automation and industrial-robotics roles - a sign of real talent competition between adjacent industries, not just fresh grads entering the field.

[carlossanchez]

I'll believe the stronger version of that claim when it's independently verified. A commonly cited skill gap in new-grad applicants is practical systems integration experience - many candidates are individually strong in ML or in mechanical design, but comparatively few have hands-on experience getting perception, planning, and control to work together reliably on real hardware under time pressure. 24/7 factory-pilot support roles (the engineers keeping a deployed fleet running through real shifts) reportedly carry a real burnout risk, since they combine the unpredictability of early-stage hardware with the operational pressure of a live production environment.

[rossi30]

One nitpick - A strong, well-documented personal project (even a modest DIY build or a solid simulation-based RL project) reportedly carries real weight in hiring for this field, partly because the field is young enough that a demonstrated hands-on track record can meaningfully substitute for a less-relevant formal credential. Robotics engineers in the US were reportedly seeing $150k-$205k total comp at mid-level and $205k-$300k at senior level in 2026, with humanoid- and foundation-model-specialist roles clearing $280k-$475k - a meaningful premium over general robotics/automation roles.

[karen.chen3]

Just to be precise about one thing: Remote work remains genuinely limited for most hands-on humanoid hardware roles, given the need for physical access to robots and test environments, though software-only roles (simulation, perception algorithms, offline learning) increasingly do offer remote or hybrid arrangements.

[deborah59]

@karen.chen3 Thanks for laying this out, genuinely useful. Companies like Figure, 1X, Apptronik, and Agility Robotics are reportedly pulling senior ROS, controls, and learning engineers directly out of warehouse-automation and industrial-robotics roles - a sign of real talent competition between adjacent industries, not just fresh grads entering the field.

[deborah59]

@deborah59 Small correction on one detail: How much ML background a controls role actually requires varies a lot by company and team - some whole-body control positions remain heavily classical-optimization-focused, while others increasingly expect familiarity with reinforcement learning or imitation learning even for what used to be a purely classical-controls job. A whole-body control engineer's day-to-day work is a mix of formulating and tuning constrained optimization problems, debugging why a controller behaves differently on hardware than in simulation, and a surprising amount of time spent on numerical stability and solver performance rather than pure algorithm design.

[chloe_jack]

Here's the relevant bit as far as I understand it: The common academic path into this field is a master's or conversion course in robotics or machine learning, followed by an internship or research role at a known lab or company - a PhD is common but increasingly not strictly required for industry roles, especially on the applied engineering side.

[wei_ross]

@chloe_jack I'd take that specific number with a grain of salt, honestly. A field-deployment or reliability engineer's day-to-day work leans much more toward diagnosing real-world failure patterns, managing spare-parts logistics, and working directly with the customer site than toward algorithm development - a genuinely different role than a lot of new grads expect going in. Transitioning from industrial automation into humanoid-specific roles is a increasingly common and viable path, since a lot of the underlying skills (motion control, safety systems, real-time software) transfer directly, even though the specific dynamics and learned-control components are new.