What's the current bottleneck in scaling manipulation training data collection?

End effectors, dexterous hands, tendon drives, tactile fingertips, grasp planning, and teleoperation.
kwilliams
Posts: 309
Joined: Sat Sep 21, 2024 1:57 pm

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by kwilliams »

@betty.king Appreciate the detailed answer. In-hand reorientation (repositioning a grasped object without setting it down) is one of the more advanced manipulation skills, requiring either a highly dexterous hand with enough DoF or clever use of gravity and controlled slipping - it's an active research area rather than a solved problem.
he/him
ronald.clark
Posts: 64
Joined: Sat Feb 14, 2026 9:05 am

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by ronald.clark »

@kwilliams +1 to this. Worth adding: Grasp planning for deformable or non-rigid objects (bags, cables, cloth) remains one of the genuinely unsolved problems in manipulation - rigid-body grasp models simply don't capture how the object will behave once contact starts. This whole thread is a good reminder how young this field still is.
scott.andersson5
Posts: 172
Joined: Sat Nov 02, 2024 8:39 pm

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by scott.andersson5 »

Tangent, but worth mentioning: A lot of the manipulation shown in production demos still leans heavily on teleoperation, particularly for anything involving fine force control or novel objects - autonomous grasp success rates on genuinely unstructured, previously-unseen clutter are still well below what teleoperation can achieve.
young56
Posts: 123
Joined: Mon Jun 09, 2025 5:26 pm

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by young56 »

I dealt with almost this exact situation. Underactuated hands (fewer actuators than joints, using mechanical coupling to shape the grasp) are a reasonable engineering compromise for robust power grasps on a budget, but they generally can't do fine in-hand manipulation the way a fully actuated hand can. Bimanual manipulation - two arms coordinating on one task - is harder than it looks mostly because of the added degrees of freedom and the timing/force coordination required; a lot of 'two-handed' demos are actually closer to two independent single-hand tasks done in sequence.
she/her | grad student, biped locomotion
tmartin
Posts: 30
Joined: Mon May 25, 2026 8:56 pm

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by tmartin »

Worth being a little skeptical of the marketing angle here. Underactuated hands (fewer actuators than joints, using mechanical coupling to shape the grasp) are a reasonable engineering compromise for robust power grasps on a budget, but they generally can't do fine in-hand manipulation the way a fully actuated hand can. In-hand reorientation (repositioning a grasped object without setting it down) is one of the more advanced manipulation skills, requiring either a highly dexterous hand with enough DoF or clever use of gravity and controlled slipping - it's an active research area rather than a solved problem.
he/him
ssantos
Posts: 105
Joined: Wed Sep 03, 2025 12:03 am

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by ssantos »

@tmartin This raises a question for me - Vision-based grasp confidence estimation (predicting success before attempting a grasp) and tactile-based confirmation (confirming after contact) are complementary rather than competing - vision helps you choose a grasp, tactile tells you if it actually worked. Compliant wrists that absorb impact during a bad approach or misjudged contact reduce mechanical stress on the whole arm, which matters a lot for long-term reliability even though it's a less visible feature than the hand itself. This whole thread is a good reminder how young this field still is.
they/them
amandawhite
Posts: 53
Joined: Wed May 13, 2026 1:15 pm

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by amandawhite »

I'd frame this differently. Palm sensing gets less attention than fingertip sensing, but a lot of power grasps (holding a box, a tool handle) rely more on palm and lateral finger contact than fingertip contact, so under-sensing the palm can leave a real blind spot in grasp confidence. In-hand reorientation (repositioning a grasped object without setting it down) is one of the more advanced manipulation skills, requiring either a highly dexterous hand with enough DoF or clever use of gravity and controlled slipping - it's an active research area rather than a solved problem.
"The best actuator is the one that doesn't overheat."
yuki71
Posts: 163
Joined: Mon Jan 06, 2025 1:05 pm

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by yuki71 »

Agreed, and I'd add: Figure's fourth-generation Dexterous Hand (on Figure 02/03) reportedly offers 16 degrees of freedom per hand with sensors integrated into each finger, aimed at fine force control tasks like handling small electronic components without crushing them. Grasp planning for deformable or non-rigid objects (bags, cables, cloth) remains one of the genuinely unsolved problems in manipulation - rigid-body grasp models simply don't capture how the object will behave once contact starts.
he/him | robotics hobbyist since the DARPA Grand Challenge days
sarah.santos3
Posts: 213
Joined: Thu Feb 13, 2025 5:30 am

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by sarah.santos3 »

Slight correction, though the overall point stands: Imitation learning from human demonstration video (without robot teleoperation data) is an appealing way to scale up training data cheaply, but it runs into the embodiment gap - human hand kinematics and force profiles don't map directly onto a robot hand's very different mechanism.
they/them
jchen
Posts: 70
Joined: Fri Dec 19, 2025 2:19 pm

Re: What's the current bottleneck in scaling manipulation training data collection?

Post by jchen »

@sarah.santos3 Minor factual note: Grasp planning for deformable or non-rigid objects (bags, cables, cloth) remains one of the genuinely unsolved problems in manipulation - rigid-body grasp models simply don't capture how the object will behave once contact starts.
"The best actuator is the one that doesn't overheat."
Post Reply