Anyone using simulation-only training for grasp policies with zero real data?
-
michaelroberts
- Posts: 41
- Joined: Sun Apr 05, 2026 8:34 pm
Re: Anyone using simulation-only training for grasp policies with zero real data?
@sandra_ivan Worth being a little skeptical of the marketing angle here.
Grasp planning for deformable or non-rigid objects (bags, cables, cloth) remains one of the genuinely unsolved problems in manipulation - rigid-body grasp models simply don't capture how the object will behave once contact starts.
"The best actuator is the one that doesn't overheat."
-
amandawhite
- Posts: 53
- Joined: Wed May 13, 2026 1:15 pm
Re: Anyone using simulation-only training for grasp policies with zero real data?
@michaelroberts Slight correction, though the overall point stands:
Bimanual manipulation - two arms coordinating on one task - is harder than it looks mostly because of the added degrees of freedom and the timing/force coordination required; a lot of 'two-handed' demos are actually closer to two independent single-hand tasks done in sequence.
"The best actuator is the one that doesn't overheat."
Re: Anyone using simulation-only training for grasp policies with zero real data?
Just to be precise about one thing:
Cable routing through a wrist joint with multiple degrees of freedom is a genuinely tricky mechanical design problem - tendons and wiring both need enough slack to avoid binding through the full range of motion without tangling or fraying over thousands of cycles. Tendon-driven fingers let you move the heavier actuators back into the palm or forearm, keeping the fingers themselves light and fast, but they introduce cable routing, tensioning, and long-term wear problems that direct-actuated fingers don't have.
they/them
-
charlesbianchi
- Posts: 157
- Joined: Fri Apr 18, 2025 2:51 am
Re: Anyone using simulation-only training for grasp policies with zero real data?
This is a great summary, thanks.
In-hand reorientation (repositioning a grasped object without setting it down) is one of the more advanced manipulation skills, requiring either a highly dexterous hand with enough DoF or clever use of gravity and controlled slipping - it's an active research area rather than a solved problem. Figure's fourth-generation Dexterous Hand (on Figure 02/03) reportedly offers 16 degrees of freedom per hand with sensors integrated into each finger, aimed at fine force control tasks like handling small electronic components without crushing them.
she/her
Re: Anyone using simulation-only training for grasp policies with zero real data?
This matches what I've seen too.
Grasp planning for deformable or non-rigid objects (bags, cables, cloth) remains one of the genuinely unsolved problems in manipulation - rigid-body grasp models simply don't capture how the object will behave once contact starts.
he/him
-
donna_wata
- Posts: 27
- Joined: Tue Jun 09, 2026 5:06 am
Re: Anyone using simulation-only training for grasp policies with zero real data?
@kwilliams Slightly off-topic, but related:
Object occlusion by the robot's own hand during the final approach to a grasp is a common and annoying perception problem - the closer the hand gets to a good grasp position, the more it blocks the camera's view of exactly what it's about to grab.
Re: Anyone using simulation-only training for grasp policies with zero real data?
@donna_wata Follow-up question though -
Bimanual manipulation - two arms coordinating on one task - is harder than it looks mostly because of the added degrees of freedom and the timing/force coordination required; a lot of 'two-handed' demos are actually closer to two independent single-hand tasks done in sequence.
they/them
Re: Anyone using simulation-only training for grasp policies with zero real data?
@young58 I'd push back on this a bit.
Bimanual manipulation - two arms coordinating on one task - is harder than it looks mostly because of the added degrees of freedom and the timing/force coordination required; a lot of 'two-handed' demos are actually closer to two independent single-hand tasks done in sequence. A lot of the manipulation shown in production demos still leans heavily on teleoperation, particularly for anything involving fine force control or novel objects - autonomous grasp success rates on genuinely unstructured, previously-unseen clutter are still well below what teleoperation can achieve.
Reminds me a bit of the early drone hobbyist scene, honestly.
"Torque is a lifestyle."
Re: Anyone using simulation-only training for grasp policies with zero real data?
@byang Yeah, this tracks with what I've read as well.
Vision-based grasp confidence estimation (predicting success before attempting a grasp) and tactile-based confirmation (confirming after contact) are complementary rather than competing - vision helps you choose a grasp, tactile tells you if it actually worked. Grasp planning for deformable or non-rigid objects (bags, cables, cloth) remains one of the genuinely unsolved problems in manipulation - rigid-body grasp models simply don't capture how the object will behave once contact starts.
she/her
-
pierregreen
- Posts: 205
- Joined: Thu Dec 12, 2024 11:01 am
Re: Anyone using simulation-only training for grasp policies with zero real data?
@johnrossi Minor factual note:
Vision-based grasp confidence estimation (predicting success before attempting a grasp) and tactile-based confirmation (confirming after contact) are complementary rather than competing - vision helps you choose a grasp, tactile tells you if it actually worked.
Makes me wonder how this looks in another five years.
she/her