Anyone track Fourier Intelligence's GR-series export/adoption outside China?
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
@barbara50 This is exactly the kind of context I was looking for.
Apptronik raised a $520 million Series A at a $5 billion valuation (bringing total funding to roughly $935 million), with its Apollo humanoid reportedly being tested by Mercedes-Benz - a notable data point for how much capital a single humanoid startup can now attract. Boston Dynamics' commercial electric Atlas (launched for Hyundai factory pilots) fully replaced the older hydraulic Atlas platform's actuation with electric quasi-direct-drive joints, resulting in a quieter, lighter robot with comparable or better dynamic performance for the pilot use cases.
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
@lbianchi Related question -
Automotive manufacturers - BMW, Mercedes, BYD, Geely, and Toyota among them - have become some of the most important early adopters, largely because their factories already have the structured environments and safety processes that make early humanoid deployment more tractable.
he/him | robotics hobbyist since the DARPA Grand Challenge days
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
@matthew43 Not to derail, but this reminds me of something adjacent:
Unitree's G1 humanoid starts at roughly $16,000, a price point well below full-size US-built humanoid platforms, and the company reportedly sold around 5,500 units - a meaningful data point in how aggressively Chinese manufacturers are pushing the price floor down. Apptronik raised a $520 million Series A at a $5 billion valuation (bringing total funding to roughly $935 million), with its Apollo humanoid reportedly being tested by Mercedes-Benz - a notable data point for how much capital a single humanoid startup can now attract.
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
One nitpick -
Boston Dynamics' commercial electric Atlas (launched for Hyundai factory pilots) fully replaced the older hydraulic Atlas platform's actuation with electric quasi-direct-drive joints, resulting in a quieter, lighter robot with comparable or better dynamic performance for the pilot use cases. Apptronik raised a $520 million Series A at a $5 billion valuation (bringing total funding to roughly $935 million), with its Apollo humanoid reportedly being tested by Mercedes-Benz - a notable data point for how much capital a single humanoid startup can now attract.
This whole thread is a good reminder how young this field still is.
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
@carol38 Minor factual note:
Total humanoid robotics funding from 2023 through early 2026 across major companies, smaller startups, and corporate R&D programs is estimated at more than $12 billion, illustrating how fast capital has piled into the sector in a short window. Tesla reportedly deployed more than 1,000 Optimus Gen 3 units into its own Fremont, Austin, and Berlin factories starting around January 2026, with a stated capacity target near 100,000 units for the year - it's worth noting these are internal factory deployments, not confirmed third-party commercial sales.
he/him
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
@kwilliams Related question -
Agility Robotics' Digit is operating in Amazon fulfillment centers and GXO warehouses moving totes, backed by a factory with roughly 10,000 units of annual production capacity - one of the more mature commercial-scale logistics deployments as of 2026.
-
williams84
- Posts: 237
- Joined: Sat Sep 28, 2024 8:50 am
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
Not sure I fully agree here.
1X's NEO platform is notable for explicitly targeting home use rather than only industrial deployment, which is a meaningfully different (and arguably harder) engineering and safety target than warehouse or factory-floor robots.
"The best actuator is the one that doesn't overheat."
-
mohammed64
- Posts: 99
- Joined: Mon Jul 28, 2025 9:56 am
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
@williams84 Speaking from personal experience here,
Tesla reportedly deployed more than 1,000 Optimus Gen 3 units into its own Fremont, Austin, and Berlin factories starting around January 2026, with a stated capacity target near 100,000 units for the year - it's worth noting these are internal factory deployments, not confirmed third-party commercial sales. Total humanoid robotics funding from 2023 through early 2026 across major companies, smaller startups, and corporate R&D programs is estimated at more than $12 billion, illustrating how fast capital has piled into the sector in a short window.
he/him | robotics hobbyist since the DARPA Grand Challenge days
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
@mohammed64 Here's the relevant bit as far as I understand it:
Unitree's G1 humanoid starts at roughly $16,000, a price point well below full-size US-built humanoid platforms, and the company reportedly sold around 5,500 units - a meaningful data point in how aggressively Chinese manufacturers are pushing the price floor down.
she/her | grad student, biped locomotion
-
jonathan.rao1
- Posts: 156
- Joined: Fri Dec 20, 2024 7:58 pm
Re: Anyone track Fourier Intelligence's GR-series export/adoption outside China?
Here's what I know on this:
AgiBot reportedly sold around 5,168 units, putting it roughly in the same commercial volume range as Unitree among Chinese manufacturers, and worth watching alongside the more internationally recognized Chinese players. Tesla reportedly deployed more than 1,000 Optimus Gen 3 units into its own Fremont, Austin, and Berlin factories starting around January 2026, with a stated capacity target near 100,000 units for the year - it's worth noting these are internal factory deployments, not confirmed third-party commercial sales.
Makes me wonder how this looks in another five years.
Currently: 3D printing my way to bankruptcy.