How do you model demand elasticity as unit prices keep dropping?

Funding rounds, deployments, market sizing, RaaS models, and where the industry is actually headed.
sarah.santos3
Posts: 213
Joined: Thu Feb 13, 2025 5:30 am

Re: How do you model demand elasticity as unit prices keep dropping?

Post by sarah.santos3 »

@rtorres This matches what I've seen too. Chinese humanoid startups reportedly accounted for around 65% of deal volume in 2025, while US companies still won the largest individual rounds, with at least three raises exceeding $400 million - deal count and deal size tell different stories depending on which region you're looking at. Self-reported deployment and uptime numbers from humanoid companies are inherently hard to independently verify, since there's no standardized, third-party reporting requirement yet - a healthy dose of skepticism toward company press releases is reasonable until independent data catches up.
they/them
joseph_sing
Posts: 63
Joined: Wed Dec 10, 2025 2:29 am

Re: How do you model demand elasticity as unit prices keep dropping?

Post by joseph_sing »

This is exactly the kind of context I was looking for. Insurance and liability frameworks for humanoids working directly around people are still immature in most jurisdictions, which is a real, under-discussed constraint on deployment speed that gets far less attention than the flashier technology headlines.
"The best actuator is the one that doesn't overheat."
scott21
Posts: 256
Joined: Fri Oct 11, 2024 9:57 am

Re: How do you model demand elasticity as unit prices keep dropping?

Post by scott21 »

One nitpick - The humanoid robot market is estimated at roughly $5.41 billion in 2026, with projections reaching around $50 billion by 2035 (about 28% CAGR) - a genuinely huge projected growth curve, and also exactly the kind of number worth treating with healthy skepticism given how young and unproven the underlying revenue base still is.
she/her
yuki71
Posts: 163
Joined: Mon Jan 06, 2025 1:05 pm

Re: How do you model demand elasticity as unit prices keep dropping?

Post by yuki71 »

Genuine beginner question - Pilot-to-contract conversion rate is one of the most important and least publicly available numbers in this industry - a company running many flashy pilots isn't the same as a company converting those pilots into multi-year recurring revenue. Kind of makes me think about how different this all looked even three years ago.
he/him | robotics hobbyist since the DARPA Grand Challenge days
giulia.roberts4
Posts: 109
Joined: Wed Jun 25, 2025 1:06 pm

Re: How do you model demand elasticity as unit prices keep dropping?

Post by giulia.roberts4 »

@yuki71 This matches something I went through recently. The humanoid robot market is estimated at roughly $5.41 billion in 2026, with projections reaching around $50 billion by 2035 (about 28% CAGR) - a genuinely huge projected growth curve, and also exactly the kind of number worth treating with healthy skepticism given how young and unproven the underlying revenue base still is.
"The best actuator is the one that doesn't overheat."
ashley_flor
Posts: 109
Joined: Fri May 09, 2025 8:12 pm

Re: How do you model demand elasticity as unit prices keep dropping?

Post by ashley_flor »

@giulia.roberts4 Worth being a little skeptical of the marketing angle here. Global humanoid robotics funding reached roughly $8.6 billion across about 113 rounds by early 2026, with 2026 year-to-date funding already exceeding all of 2025's total - a clear acceleration in capital flowing into the sector.
dchen
Posts: 182
Joined: Wed Nov 13, 2024 6:51 am

Re: How do you model demand elasticity as unit prices keep dropping?

Post by dchen »

@ashley_flor I see it a little differently. Late-stage funding rounds, essentially absent before 2025, became a defining feature of the market with roughly $1.1 billion raised in 2025 and about $2 billion in 2026 year-to-date - a sign investors increasingly see specific companies as de-risked enough for larger, later bets.
shill
Posts: 102
Joined: Wed Aug 20, 2025 3:09 pm

Re: How do you model demand elasticity as unit prices keep dropping?

Post by shill »

I see it a little differently. Automotive OEMs becoming the leading early-adopter vertical isn't really about cars specifically - it's about those companies already having structured facilities, existing automation budgets, and risk tolerance for piloting new equipment at scale. Q1 2026 alone saw about $2.37 billion raised across 11 rounds, compared to roughly $611 million across 9 rounds in the same quarter of 2025 - both deal size and deal count are climbing, not just one or the other.
tariqlarsen
Posts: 83
Joined: Sun Jun 15, 2025 4:28 pm

Re: How do you model demand elasticity as unit prices keep dropping?

Post by tariqlarsen »

@shill I'll believe the stronger version of that claim when it's independently verified. The 'labor shortage' framing in a lot of humanoid robotics pitch decks is doing real narrative work - it's a genuinely true dynamic in some sectors like warehousing and logistics, but it's also a much more palatable framing than 'labor cost reduction,' and both are usually true simultaneously. Anyway, good thread - following for more.
"Torque is a lifestyle."
Post Reply