Isaac Lab vs MuJoCo - which do you actually train on and why?

Whole-body control, RL policies, VLA models, sim-to-real, ROS2, and the software stack that makes a humanoid actually walk and act.
erik_novi
Posts: 192
Joined: Sun Oct 13, 2024 6:23 am

Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by erik_novi »

Figured this was worth its own thread rather than burying it in another one. Balance-recovery controllers are usually evaluated with push-recovery tests (a known, repeatable lateral push) in demos, but real-world robustness also depends on recovering from unstructured events like uneven flooring, unexpected contact, or a dropped payload shifting the center of mass mid-stride - which is a much harder, less demo-friendly test. 'Zero-shot sim-to-real' rarely means literally zero real-world tuning in practice - it usually means the policy transfers well enough to be usable with only calibration and minor safety-limit adjustments, rather than needing a full additional training phase on hardware. Physical Intelligence's pi0 pairs a smaller pretrained vision-language backbone with a separate flow-matching 'action expert' module, which is one way to get fast, high-frequency action output without needing the whole giant language model to run at control-loop speed. Open to being corrected on the specifics.
she/her
dubois35
Posts: 280
Joined: Mon Sep 09, 2024 12:01 pm

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by dubois35 »

I'll believe the stronger version of that claim when it's independently verified. Vision-Language-Action (VLA) models like RT-2, OpenVLA, and Physical Intelligence's pi0 unify a vision-language backbone with an action-output head, letting a robot map a camera image and a text instruction directly to motor commands instead of hand-coding separate perception and planning stages. ROS2 remains common in research and early-stage products for its tooling and ecosystem, but a number of production humanoid companies run custom, more tightly-optimized middleware for their real-time control loops, using ROS2-like tooling mainly for development, visualization, and non-real-time subsystems. This whole thread is a good reminder how young this field still is.
they/them
deborahperez
Posts: 279
Joined: Sat Aug 31, 2024 4:22 am

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by deborahperez »

That's the official framing, at least - reality tends to lag a bit. Zero Moment Point (ZMP) control keeps the robot's center of pressure within its support polygon and has been the classical backbone of bipedal walking for two decades - it's robust and well-understood, but tends to produce a somewhat conservative, flat-footed gait compared to more dynamic approaches.
camila.jackson0
Posts: 225
Joined: Wed Oct 09, 2024 1:27 am

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by camila.jackson0 »

Just to be precise about one thing: Isaac Lab (the successor to Isaac Gym) is widely used for large-scale parallel RL training thanks to GPU-accelerated physics, while MuJoCo is often used as a secondary 'sim-to-sim' validation step because its contact dynamics are generally considered more realistic than Isaac's, even though it trains slower at scale.
Building > buying.
zoeanderson
Posts: 243
Joined: Sat Oct 26, 2024 2:39 am

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by zoeanderson »

@camila.jackson0 Slight correction, though the overall point stands: Sim-to-real transfer still commonly breaks on contact dynamics - friction, restitution, and deformable/compliant surfaces are the hardest things to model accurately in simulation, so policies trained purely in sim often need real-world fine-tuning specifically around contact-rich tasks. Model predictive control (MPC) is still very much alive in production humanoids, often working alongside or underneath learned policies - MPC handles short-horizon dynamically-consistent trajectory optimization while learned components handle perception, task-level decisions, or recovery behaviors that are hard to hand-model.
camila.jackson0
Posts: 225
Joined: Wed Oct 09, 2024 1:27 am

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by camila.jackson0 »

@zoeanderson I don't think that's quite right, for what it's worth. Whole-body control (WBC) formulates locomotion and manipulation as a single optimization problem across all joints simultaneously, respecting contact constraints and task priorities - it's more general than ZMP-only approaches but is computationally heavier and harder to tune.
Building > buying.
zoeanderson
Posts: 243
Joined: Sat Oct 26, 2024 2:39 am

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by zoeanderson »

Ran into exactly this myself. Diffusion policies model the distribution of possible actions and sample from it, which handles multimodal manipulation tasks (multiple valid ways to grasp something) more naturally than a single deterministic action output, at the cost of slower inference. Totally unrelated but has anyone else noticed how fast component costs are dropping this year.
emilyperez
Posts: 246
Joined: Mon Oct 28, 2024 8:03 pm

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by emilyperez »

Same conclusion I've come to. Also worth noting: Cross-embodiment training (training one policy across data from multiple different robot bodies) has shown some real transfer benefits for high-level behaviors, but low-level control (exact joint torques, timing) still tends to need embodiment-specific fine-tuning. OpenVLA is a notable open-source VLA model - roughly 7 billion parameters, trained on hundreds of thousands of real-world robot demonstrations - and has been shown to outperform much larger closed models on some manipulation benchmarks, which says a lot about how much of VLA performance comes from data curation rather than raw scale.
camila.jackson0
Posts: 225
Joined: Wed Oct 09, 2024 1:27 am

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by camila.jackson0 »

Slight correction, though the overall point stands: Domain randomization - varying friction, mass, sensor noise, and even visual textures during training - is one of the more reliable tricks for improving sim-to-real transfer, but overdoing it can make training slower to converge and produce overly conservative policies. A lot of what reads as 'full autonomy' in public demos is closer to a mix of scripted state machines, teleoperation for the hardest sub-tasks, and autonomous execution for the easier, well-rehearsed parts - transparency about this mix varies a lot between companies.
Building > buying.
erik_novi
Posts: 192
Joined: Sun Oct 13, 2024 6:23 am

Re: Isaac Lab vs MuJoCo - which do you actually train on and why?

Post by erik_novi »

Follow-up question though - OpenVLA is a notable open-source VLA model - roughly 7 billion parameters, trained on hundreds of thousands of real-world robot demonstrations - and has been shown to outperform much larger closed models on some manipulation benchmarks, which says a lot about how much of VLA performance comes from data curation rather than raw scale. Kind of makes me think about how different this all looked even three years ago.
she/her
Post Reply