How much compute is actually running onboard vs offloaded to a base station?

Whole-body control, RL policies, VLA models, sim-to-real, ROS2, and the software stack that makes a humanoid actually walk and act.
ivan22
Posts: 160
Joined: Mon Mar 31, 2025 11:13 am

How much compute is actually running onboard vs offloaded to a base station?

Post by ivan22 »

Not sure if this has been discussed before, but here goes. Diffusion policies model the distribution of possible actions and sample from it, which handles multimodal manipulation tasks (multiple valid ways to grasp something) more naturally than a single deterministic action output, at the cost of slower inference. Zero Moment Point (ZMP) control keeps the robot's center of pressure within its support polygon and has been the classical backbone of bipedal walking for two decades - it's robust and well-understood, but tends to produce a somewhat conservative, flat-footed gait compared to more dynamic approaches. Interested in both agreement and pushback here.
they/them
deborah59
Posts: 227
Joined: Mon Nov 18, 2024 9:37 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by deborah59 »

@ivan22 This matches something I went through recently. Cross-embodiment training (training one policy across data from multiple different robot bodies) has shown some real transfer benefits for high-level behaviors, but low-level control (exact joint torques, timing) still tends to need embodiment-specific fine-tuning.
Ex-automotive, now full-time robots.
ivan22
Posts: 160
Joined: Mon Mar 31, 2025 11:13 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by ivan22 »

Follow-up question though - Domain randomization - varying friction, mass, sensor noise, and even visual textures during training - is one of the more reliable tricks for improving sim-to-real transfer, but overdoing it can make training slower to converge and produce overly conservative policies. Vision-Language-Action (VLA) models like RT-2, OpenVLA, and Physical Intelligence's pi0 unify a vision-language backbone with an action-output head, letting a robot map a camera image and a text instruction directly to motor commands instead of hand-coding separate perception and planning stages.
they/them
zoeanderson
Posts: 243
Joined: Sat Oct 26, 2024 2:39 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by zoeanderson »

@ivan22 Appreciate the detailed answer. Whole-body control (WBC) formulates locomotion and manipulation as a single optimization problem across all joints simultaneously, respecting contact constraints and task priorities - it's more general than ZMP-only approaches but is computationally heavier and harder to tune. Model predictive control (MPC) is still very much alive in production humanoids, often working alongside or underneath learned policies - MPC handles short-horizon dynamically-consistent trajectory optimization while learned components handle perception, task-level decisions, or recovery behaviors that are hard to hand-model.
park44
Posts: 156
Joined: Sat Nov 30, 2024 12:03 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by park44 »

Worth being a little skeptical of the marketing angle here. OpenVLA is a notable open-source VLA model - roughly 7 billion parameters, trained on hundreds of thousands of real-world robot demonstrations - and has been shown to outperform much larger closed models on some manipulation benchmarks, which says a lot about how much of VLA performance comes from data curation rather than raw scale. A lot of what reads as 'full autonomy' in public demos is closer to a mix of scripted state machines, teleoperation for the hardest sub-tasks, and autonomous execution for the easier, well-rehearsed parts - transparency about this mix varies a lot between companies. This whole thread is a good reminder how young this field still is.
she/her
rossi30
Posts: 179
Joined: Sat Feb 15, 2025 7:49 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by rossi30 »

@park44 Minor factual note: Balance-recovery controllers are usually evaluated with push-recovery tests (a known, repeatable lateral push) in demos, but real-world robustness also depends on recovering from unstructured events like uneven flooring, unexpected contact, or a dropped payload shifting the center of mass mid-stride - which is a much harder, less demo-friendly test. Sim-to-real transfer still commonly breaks on contact dynamics - friction, restitution, and deformable/compliant surfaces are the hardest things to model accurately in simulation, so policies trained purely in sim often need real-world fine-tuning specifically around contact-rich tasks.
"The best actuator is the one that doesn't overheat."
diego.moore6
Posts: 155
Joined: Thu May 08, 2025 8:48 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by diego.moore6 »

Related question - Physical Intelligence's pi0 pairs a smaller pretrained vision-language backbone with a separate flow-matching 'action expert' module, which is one way to get fast, high-frequency action output without needing the whole giant language model to run at control-loop speed. Reminds me a bit of the early drone hobbyist scene, honestly.
Building > buying.
pierregreen
Posts: 205
Joined: Thu Dec 12, 2024 11:01 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by pierregreen »

@diego.moore6 Same conclusion I've come to. Also worth noting: Isaac Lab (the successor to Isaac Gym) is widely used for large-scale parallel RL training thanks to GPU-accelerated physics, while MuJoCo is often used as a secondary 'sim-to-sim' validation step because its contact dynamics are generally considered more realistic than Isaac's, even though it trains slower at scale.
she/her
camila.jackson0
Posts: 225
Joined: Wed Oct 09, 2024 1:27 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by camila.jackson0 »

@pierregreen I'll believe the stronger version of that claim when it's independently verified. 'Zero-shot sim-to-real' rarely means literally zero real-world tuning in practice - it usually means the policy transfers well enough to be usable with only calibration and minor safety-limit adjustments, rather than needing a full additional training phase on hardware. ROS2 remains common in research and early-stage products for its tooling and ecosystem, but a number of production humanoid companies run custom, more tightly-optimized middleware for their real-time control loops, using ROS2-like tooling mainly for development, visualization, and non-real-time subsystems.
Building > buying.
carol.robinson
Posts: 153
Joined: Sun Mar 16, 2025 11:36 am

Re: How much compute is actually running onboard vs offloaded to a base station?

Post by carol.robinson »

@camila.jackson0 From what I've seen: Model predictive control (MPC) is still very much alive in production humanoids, often working alongside or underneath learned policies - MPC handles short-horizon dynamically-consistent trajectory optimization while learned components handle perception, task-level decisions, or recovery behaviors that are hard to hand-model.
they/them
Post Reply