What's your favorite open-source locomotion RL framework right now?

Whole-body control, RL policies, VLA models, sim-to-real, ROS2, and the software stack that makes a humanoid actually walk and act.
mohammed64
Posts: 99
Joined: Mon Jul 28, 2025 9:56 am

What's your favorite open-source locomotion RL framework right now?

Post by mohammed64 »

This came up in a Discord I'm in and I wanted a more permanent place to discuss it. Sim-to-real transfer still commonly breaks on contact dynamics - friction, restitution, and deformable/compliant surfaces are the hardest things to model accurately in simulation, so policies trained purely in sim often need real-world fine-tuning specifically around contact-rich tasks. OpenVLA is a notable open-source VLA model - roughly 7 billion parameters, trained on hundreds of thousands of real-world robot demonstrations - and has been shown to outperform much larger closed models on some manipulation benchmarks, which says a lot about how much of VLA performance comes from data curation rather than raw scale. Interested to see if this matches what others are seeing.
he/him | robotics hobbyist since the DARPA Grand Challenge days
emma_whit
Posts: 73
Joined: Thu Dec 25, 2025 11:20 pm

Re: What's your favorite open-source locomotion RL framework right now?

Post by emma_whit »

@mohammed64 I dealt with almost this exact situation. 'Zero-shot sim-to-real' rarely means literally zero real-world tuning in practice - it usually means the policy transfers well enough to be usable with only calibration and minor safety-limit adjustments, rather than needing a full additional training phase on hardware.
deborahperez
Posts: 279
Joined: Sat Aug 31, 2024 4:22 am

Re: What's your favorite open-source locomotion RL framework right now?

Post by deborahperez »

I'd push back on this a bit. Balance-recovery controllers are usually evaluated with push-recovery tests (a known, repeatable lateral push) in demos, but real-world robustness also depends on recovering from unstructured events like uneven flooring, unexpected contact, or a dropped payload shifting the center of mass mid-stride - which is a much harder, less demo-friendly test.
jhansen
Posts: 209
Joined: Sat Nov 02, 2024 8:27 am

Re: What's your favorite open-source locomotion RL framework right now?

Post by jhansen »

Sorry if this is a basic question, but Domain randomization - varying friction, mass, sensor noise, and even visual textures during training - is one of the more reliable tricks for improving sim-to-real transfer, but overdoing it can make training slower to converge and produce overly conservative policies.
ashley_flor
Posts: 109
Joined: Fri May 09, 2025 8:12 pm

Re: What's your favorite open-source locomotion RL framework right now?

Post by ashley_flor »

@jhansen Follow-up question though - Vision-Language-Action (VLA) models like RT-2, OpenVLA, and Physical Intelligence's pi0 unify a vision-language backbone with an action-output head, letting a robot map a camera image and a text instruction directly to motor commands instead of hand-coding separate perception and planning stages.
nancy_lewi
Posts: 102
Joined: Sun Aug 31, 2025 1:11 pm

Re: What's your favorite open-source locomotion RL framework right now?

Post by nancy_lewi »

I'd push back on this a bit. Model predictive control (MPC) is still very much alive in production humanoids, often working alongside or underneath learned policies - MPC handles short-horizon dynamically-consistent trajectory optimization while learned components handle perception, task-level decisions, or recovery behaviors that are hard to hand-model. Zero Moment Point (ZMP) control keeps the robot's center of pressure within its support polygon and has been the classical backbone of bipedal walking for two decades - it's robust and well-understood, but tends to produce a somewhat conservative, flat-footed gait compared to more dynamic approaches.
"Torque is a lifestyle."
lperez
Posts: 55
Joined: Wed Jan 28, 2026 1:50 pm

Re: What's your favorite open-source locomotion RL framework right now?

Post by lperez »

Tangent, but worth mentioning: Physical Intelligence's pi0 pairs a smaller pretrained vision-language backbone with a separate flow-matching 'action expert' module, which is one way to get fast, high-frequency action output without needing the whole giant language model to run at control-loop speed. Isaac Lab (the successor to Isaac Gym) is widely used for large-scale parallel RL training thanks to GPU-accelerated physics, while MuJoCo is often used as a secondary 'sim-to-sim' validation step because its contact dynamics are generally considered more realistic than Isaac's, even though it trains slower at scale.
she/her
arjunsanchez
Posts: 74
Joined: Sun Nov 23, 2025 3:20 am

Re: What's your favorite open-source locomotion RL framework right now?

Post by arjunsanchez »

Appreciate the detailed answer. Diffusion policies model the distribution of possible actions and sample from it, which handles multimodal manipulation tasks (multiple valid ways to grasp something) more naturally than a single deterministic action output, at the cost of slower inference. Cross-embodiment training (training one policy across data from multiple different robot bodies) has shown some real transfer benefits for high-level behaviors, but low-level control (exact joint torques, timing) still tends to need embodiment-specific fine-tuning.
he/him | robotics hobbyist since the DARPA Grand Challenge days
williams84
Posts: 237
Joined: Sat Sep 28, 2024 8:50 am

Re: What's your favorite open-source locomotion RL framework right now?

Post by williams84 »

@arjunsanchez I don't think that's quite right, for what it's worth. ROS2 remains common in research and early-stage products for its tooling and ecosystem, but a number of production humanoid companies run custom, more tightly-optimized middleware for their real-time control loops, using ROS2-like tooling mainly for development, visualization, and non-real-time subsystems.
"The best actuator is the one that doesn't overheat."
rivera14
Posts: 54
Joined: Thu Mar 19, 2026 1:48 am

Re: What's your favorite open-source locomotion RL framework right now?

Post by rivera14 »

To answer this directly: Whole-body control (WBC) formulates locomotion and manipulation as a single optimization problem across all joints simultaneously, respecting contact constraints and task priorities - it's more general than ZMP-only approaches but is computationally heavier and harder to tune. A lot of what reads as 'full autonomy' in public demos is closer to a mix of scripted state machines, teleoperation for the hardest sub-tasks, and autonomous execution for the easier, well-rehearsed parts - transparency about this mix varies a lot between companies. This whole thread is a good reminder how young this field still is.
Ex-automotive, now full-time robots.
Post Reply