Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Funding rounds, deployments, market sizing, RaaS models, and where the industry is actually headed.
barbara50
Posts: 178
Joined: Thu Dec 19, 2024 12:19 pm

Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by barbara50 »

Figured this was worth its own thread rather than burying it in another one. Self-reported deployment and uptime numbers from humanoid companies are inherently hard to independently verify, since there's no standardized, third-party reporting requirement yet - a healthy dose of skepticism toward company press releases is reasonable until independent data catches up. The humanoid robot market is estimated at roughly $5.41 billion in 2026, with projections reaching around $50 billion by 2035 (about 28% CAGR) - a genuinely huge projected growth curve, and also exactly the kind of number worth treating with healthy skepticism given how young and unproven the underlying revenue base still is. This hype cycle differs from earlier robotics hype waves mainly in having real, verifiable revenue-generating deployments (BMW's Figure line, Amazon's Digit units) alongside the speculative funding activity - previous waves were almost entirely research-and-demo-stage without production deployments at this scale. Curious to hear how others see this.
Opinions my own, not my employer's.
barbara.jones
Posts: 164
Joined: Fri Feb 28, 2025 6:12 pm

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by barbara.jones »

@barbara50 One nitpick - The 'labor shortage' framing in a lot of humanoid robotics pitch decks is doing real narrative work - it's a genuinely true dynamic in some sectors like warehousing and logistics, but it's also a much more palatable framing than 'labor cost reduction,' and both are usually true simultaneously.
he/him | robotics hobbyist since the DARPA Grand Challenge days
choi98
Posts: 220
Joined: Sat Oct 12, 2024 12:32 am

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by choi98 »

I dealt with almost this exact situation. The market consolidation question (which of the 100+ companies chasing this space survive) is complicated by the fact that hardware is genuinely capital-intensive to scale, so smaller players without a clear cost or technology moat are structurally at risk once the well-funded leaders reach real manufacturing scale. Automotive OEMs becoming the leading early-adopter vertical isn't really about cars specifically - it's about those companies already having structured facilities, existing automation budgets, and risk tolerance for piloting new equipment at scale.
Watching this space closely since 2019.
mia.weber
Posts: 165
Joined: Thu Dec 05, 2024 4:38 am

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by mia.weber »

Same conclusion I've come to. Also worth noting: Unit economics for an early fleet deployment have to include maintenance, downtime, and technician support costs, not just the sticker price of the robot - a lower unit price (like Unitree's roughly $16k G1) doesn't automatically mean a lower total cost of ownership if support infrastructure is thinner.
williams84
Posts: 237
Joined: Sat Sep 28, 2024 8:50 am

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by williams84 »

Same conclusion I've come to. Also worth noting: Robotics-as-a-Service (RaaS) - subscription, leasing, or usage-based pricing instead of outright purchase - is emerging specifically to lower the adoption barrier for businesses that don't want to commit large capital expenditure to an unproven new category. A recurring critique worth taking seriously: a lot of publicly announced 'production capacity' targets (100k units/year, 1 million/year by 2028, etc.) are aspirational manufacturing targets, not confirmed sales or deployment numbers, and the gap between the two has historically been large in hardware industries.
"The best actuator is the one that doesn't overheat."
carlossanchez
Posts: 155
Joined: Mon Feb 17, 2025 1:44 am

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by carlossanchez »

@williams84 Counterpoint: Q1 2026 alone saw about $2.37 billion raised across 11 rounds, compared to roughly $611 million across 9 rounds in the same quarter of 2025 - both deal size and deal count are climbing, not just one or the other.
"Torque is a lifestyle."
scott.novikova7
Posts: 72
Joined: Fri Aug 08, 2025 1:06 am

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by scott.novikova7 »

@carlossanchez That's the official framing, at least - reality tends to lag a bit. Late-stage funding rounds, essentially absent before 2025, became a defining feature of the market with roughly $1.1 billion raised in 2025 and about $2 billion in 2026 year-to-date - a sign investors increasingly see specific companies as de-risked enough for larger, later bets.
erik_novi
Posts: 192
Joined: Sun Oct 13, 2024 6:23 am

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by erik_novi »

Agreed, and I'd add: Chinese humanoid startups reportedly accounted for around 65% of deal volume in 2025, while US companies still won the largest individual rounds, with at least three raises exceeding $400 million - deal count and deal size tell different stories depending on which region you're looking at. Pilot-to-contract conversion rate is one of the most important and least publicly available numbers in this industry - a company running many flashy pilots isn't the same as a company converting those pilots into multi-year recurring revenue. Reminds me a bit of the early drone hobbyist scene, honestly.
she/her
jonathan.rao1
Posts: 156
Joined: Fri Dec 20, 2024 7:58 pm

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by jonathan.rao1 »

Slightly off-topic, but related: Global humanoid robotics funding reached roughly $8.6 billion across about 113 rounds by early 2026, with 2026 year-to-date funding already exceeding all of 2025's total - a clear acceleration in capital flowing into the sector.
Currently: 3D printing my way to bankruptcy.
carol.robinson
Posts: 153
Joined: Sun Mar 16, 2025 11:36 am

Re: Anyone else notice how quickly the price floor is dropping with Chinese entrants?

Post by carol.robinson »

I dealt with almost this exact situation. Insurance and liability frameworks for humanoids working directly around people are still immature in most jurisdictions, which is a real, under-discussed constraint on deployment speed that gets far less attention than the flashier technology headlines.
they/them
Post Reply