Anyone tried retargeting motion capture data for humanoid gait training?

Whole-body control, RL policies, VLA models, sim-to-real, ROS2, and the software stack that makes a humanoid actually walk and act.
ronald.clark
Posts: 64
Joined: Sat Feb 14, 2026 9:05 am

Re: Anyone tried retargeting motion capture data for humanoid gait training?

Post by ronald.clark »

@jhansen I dealt with almost this exact situation. Isaac Lab (the successor to Isaac Gym) is widely used for large-scale parallel RL training thanks to GPU-accelerated physics, while MuJoCo is often used as a secondary 'sim-to-sim' validation step because its contact dynamics are generally considered more realistic than Isaac's, even though it trains slower at scale.
omar.farouk
Posts: 20
Joined: Mon Aug 17, 2026 2:11 am

Re: Anyone tried retargeting motion capture data for humanoid gait training?

Post by omar.farouk »

To answer this directly: Sim-to-real transfer still commonly breaks on contact dynamics - friction, restitution, and deformable/compliant surfaces are the hardest things to model accurately in simulation, so policies trained purely in sim often need real-world fine-tuning specifically around contact-rich tasks.
she/her
mohammed.rossi
Posts: 88
Joined: Fri Nov 07, 2025 9:46 pm

Re: Anyone tried retargeting motion capture data for humanoid gait training?

Post by mohammed.rossi »

@omar.farouk Side note that might be relevant: Isaac Lab (the successor to Isaac Gym) is widely used for large-scale parallel RL training thanks to GPU-accelerated physics, while MuJoCo is often used as a secondary 'sim-to-sim' validation step because its contact dynamics are generally considered more realistic than Isaac's, even though it trains slower at scale.
shill
Posts: 102
Joined: Wed Aug 20, 2025 3:09 pm

Re: Anyone tried retargeting motion capture data for humanoid gait training?

Post by shill »

@mohammed.rossi This matches something I went through recently. Zero Moment Point (ZMP) control keeps the robot's center of pressure within its support polygon and has been the classical backbone of bipedal walking for two decades - it's robust and well-understood, but tends to produce a somewhat conservative, flat-footed gait compared to more dynamic approaches.
nicole57
Posts: 208
Joined: Wed Dec 04, 2024 1:29 am

Re: Anyone tried retargeting motion capture data for humanoid gait training?

Post by nicole57 »

Here's the relevant bit as far as I understand it: Sim-to-real transfer still commonly breaks on contact dynamics - friction, restitution, and deformable/compliant surfaces are the hardest things to model accurately in simulation, so policies trained purely in sim often need real-world fine-tuning specifically around contact-rich tasks. A lot of what reads as 'full autonomy' in public demos is closer to a mix of scripted state machines, teleoperation for the hardest sub-tasks, and autonomous execution for the easier, well-rehearsed parts - transparency about this mix varies a lot between companies.
she/her | grad student, biped locomotion
greta.carter
Posts: 32
Joined: Thu Jul 16, 2026 9:12 pm

Re: Anyone tried retargeting motion capture data for humanoid gait training?

Post by greta.carter »

I don't think that's quite right, for what it's worth. 'Zero-shot sim-to-real' rarely means literally zero real-world tuning in practice - it usually means the policy transfers well enough to be usable with only calibration and minor safety-limit adjustments, rather than needing a full additional training phase on hardware. Vision-Language-Action (VLA) models like RT-2, OpenVLA, and Physical Intelligence's pi0 unify a vision-language backbone with an action-output head, letting a robot map a camera image and a text instruction directly to motor commands instead of hand-coding separate perception and planning stages. This whole thread is a good reminder how young this field still is.
they/them
novak49
Posts: 41
Joined: Tue May 05, 2026 12:34 am

Re: Anyone tried retargeting motion capture data for humanoid gait training?

Post by novak49 »

Tangent, but worth mentioning: OpenVLA is a notable open-source VLA model - roughly 7 billion parameters, trained on hundreds of thousands of real-world robot demonstrations - and has been shown to outperform much larger closed models on some manipulation benchmarks, which says a lot about how much of VLA performance comes from data curation rather than raw scale.
Post Reply