Anyone else notice how much terminology has standardized in just the last couple years?

Open discussion on humanoid robots, the field in general, and anything that doesn't fit the boxes below.
freya.smith
Posts: 72
Joined: Wed Feb 11, 2026 5:28 pm

Anyone else notice how much terminology has standardized in just the last couple years?

Post by freya.smith »

Something I keep coming back to and can't quite settle on my own. The safety case for humanoids working near people usually leans on compliant/backdrivable joints plus soft force limits, but there isn't yet a mature, widely-adopted standard equivalent to what industrial arms have had for decades. Automotive plants ended up as the first serious proving ground for humanoids mostly because they already have structured environments, safety processes, and budget for automation - not because car assembly is uniquely suited to bipeds. Anyone want to poke holes in this?
she/her
johnrossi
Posts: 119
Joined: Thu Jun 19, 2025 2:39 am

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by johnrossi »

@freya.smith Ran into exactly this myself. Elder care is one of the most emotionally appealing use cases and also one of the hardest, because it demands both physical safety around fragile people and social/communication skill that's still far behind the manipulation hype.
she/her
carlossanchez
Posts: 155
Joined: Mon Feb 17, 2025 1:44 am

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by carlossanchez »

Related question - Most flashy demo reels involve some amount of teleoperation, scripted sequencing, or cherry-picked takes - that's not necessarily dishonest, but it does mean the gap between 'demoed' and 'reliably autonomous in production' is still large. The labor-substitution narrative gets simplified a lot in pitch decks; the more honest framing right now is 'augmenting understaffed, high-turnover roles' rather than wholesale replacement.
"Torque is a lifestyle."
green28
Posts: 109
Joined: Sun May 11, 2025 2:06 am

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by green28 »

That's the official framing, at least - reality tends to lag a bit. Legs earn their keep specifically where the environment wasn't redesigned for robots - stairs, curbs, uneven yards, cluttered floors - which is a smaller slice of real-world tasks than the marketing suggests. A genuinely underrated bottleneck is neither hardware nor pure ML - it's the unglamorous integration work of making perception, planning, and control agree with each other reliably for eight-hour shifts.
smartinez
Posts: 68
Joined: Wed Nov 26, 2025 2:55 am

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by smartinez »

Sorry if this is a basic question, but The uncanny valley matters a lot less in a warehouse than in a living room - nobody cares if a picking robot looks a little stiff, but a home-companion robot with a slightly-off gait reads as unsettling fast. Open-source humanoid projects matter less for out-competing the well-funded players and more for keeping the barrier to entry low enough that new ideas and new people can actually get into the field.
Opinions my own, not my employer's.
dchen
Posts: 182
Joined: Wed Nov 13, 2024 6:51 am

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by dchen »

Counterpoint: 'General purpose' in 2026 mostly means 'can be reprogrammed for a new task without new hardware,' not 'can walk into any environment and figure things out unsupervised.' The 'humanoid' form factor mostly wins on infrastructure compatibility, not raw efficiency - stairs, doors, and tools were all built for a human body plan, so a legged, two-armed robot slots into existing spaces without retrofitting them.
donna_wata
Posts: 27
Joined: Tue Jun 09, 2026 5:06 am

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by donna_wata »

@dchen Related question - A recurring pattern in the field: a capability looks solved in a controlled demo, then takes another 18-24 months of engineering to become boringly reliable in the field.
ethan17
Posts: 138
Joined: Mon May 19, 2025 8:21 pm

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by ethan17 »

Just to be precise about one thing: Wheeled-torso designs solve 90% of warehouse and light-industrial tasks with far less complexity than a biped, which is exactly why so many 'humanoid' demos quietly have wheels under a skirt. A lot of the current wave genuinely is repackaged 2000s and 2010s research (ZMP walking, whole-body control, DARPA-era grasping) combined with two things that weren't available then: cheap high-torque-density actuators and large-scale learned policies.
"Torque is a lifestyle."
yuki71
Posts: 163
Joined: Mon Jan 06, 2025 1:05 pm

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by yuki71 »

@ethan17 Short answer: A recurring pattern in the field: a capability looks solved in a controlled demo, then takes another 18-24 months of engineering to become boringly reliable in the field. The uncanny valley matters a lot less in a warehouse than in a living room - nobody cares if a picking robot looks a little stiff, but a home-companion robot with a slightly-off gait reads as unsettling fast.
he/him | robotics hobbyist since the DARPA Grand Challenge days
matthew.yamamoto0
Posts: 66
Joined: Sun Dec 14, 2025 8:43 pm

Re: Anyone else notice how much terminology has standardized in just the last couple years?

Post by matthew.yamamoto0 »

Agreed, and I'd add: Roughly 7,000-8,000 commercial humanoids are estimated to be operational worldwide as of mid-2026, which sounds like a lot until you compare it to the millions of industrial arms already installed.
"Torque is a lifestyle."
Post Reply