How do you explain what you're excited about in this field to non-technical friends?

Open discussion on humanoid robots, the field in general, and anything that doesn't fit the boxes below.
sharonschmidt
Posts: 174
Joined: Mon Sep 30, 2024 7:31 am

How do you explain what you're excited about in this field to non-technical friends?

Post by sharonschmidt »

Been meaning to post this for a while. Most flashy demo reels involve some amount of teleoperation, scripted sequencing, or cherry-picked takes - that's not necessarily dishonest, but it does mean the gap between 'demoed' and 'reliably autonomous in production' is still large. The 'humanoid' form factor mostly wins on infrastructure compatibility, not raw efficiency - stairs, doors, and tools were all built for a human body plan, so a legged, two-armed robot slots into existing spaces without retrofitting them. Open-source humanoid projects matter less for out-competing the well-funded players and more for keeping the barrier to entry low enough that new ideas and new people can actually get into the field. Anyone want to poke holes in this?
Ex-automotive, now full-time robots.
jonathan.rao1
Posts: 156
Joined: Fri Dec 20, 2024 7:58 pm

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by jonathan.rao1 »

I see it a little differently. The uncanny valley matters a lot less in a warehouse than in a living room - nobody cares if a picking robot looks a little stiff, but a home-companion robot with a slightly-off gait reads as unsettling fast.
Currently: 3D printing my way to bankruptcy.
rossi30
Posts: 179
Joined: Sat Feb 15, 2025 7:49 am

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by rossi30 »

@jonathan.rao1 Small correction on one detail: Elder care is one of the most emotionally appealing use cases and also one of the hardest, because it demands both physical safety around fragile people and social/communication skill that's still far behind the manipulation hype.
"The best actuator is the one that doesn't overheat."
johnrossi
Posts: 119
Joined: Thu Jun 19, 2025 2:39 am

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by johnrossi »

@rossi30 Just to be precise about one thing: A lot of the current wave genuinely is repackaged 2000s and 2010s research (ZMP walking, whole-body control, DARPA-era grasping) combined with two things that weren't available then: cheap high-torque-density actuators and large-scale learned policies.
she/her
scott21
Posts: 256
Joined: Fri Oct 11, 2024 9:57 am

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by scott21 »

Ran into exactly this myself. The labor-substitution narrative gets simplified a lot in pitch decks; the more honest framing right now is 'augmenting understaffed, high-turnover roles' rather than wholesale replacement. The safety case for humanoids working near people usually leans on compliant/backdrivable joints plus soft force limits, but there isn't yet a mature, widely-adopted standard equivalent to what industrial arms have had for decades.
she/her
barbara50
Posts: 178
Joined: Thu Dec 19, 2024 12:19 pm

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by barbara50 »

@scott21 I'll believe the stronger version of that claim when it's independently verified. Automotive plants ended up as the first serious proving ground for humanoids mostly because they already have structured environments, safety processes, and budget for automation - not because car assembly is uniquely suited to bipeds.
Opinions my own, not my employer's.
camila.jackson0
Posts: 225
Joined: Wed Oct 09, 2024 1:27 am

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by camila.jackson0 »

@barbara50 I'd frame this differently. Roughly 7,000-8,000 commercial humanoids are estimated to be operational worldwide as of mid-2026, which sounds like a lot until you compare it to the millions of industrial arms already installed. Legs earn their keep specifically where the environment wasn't redesigned for robots - stairs, curbs, uneven yards, cluttered floors - which is a smaller slice of real-world tasks than the marketing suggests.
Building > buying.
richard36
Posts: 96
Joined: Tue Jul 29, 2025 9:43 am

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by richard36 »

@camila.jackson0 Just to be precise about one thing: Wheeled-torso designs solve 90% of warehouse and light-industrial tasks with far less complexity than a biped, which is exactly why so many 'humanoid' demos quietly have wheels under a skirt.
"The best actuator is the one that doesn't overheat."
noah_pate
Posts: 169
Joined: Tue Nov 26, 2024 8:25 pm

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by noah_pate »

@richard36 Pretty much this. One thing to add: 'General purpose' in 2026 mostly means 'can be reprogrammed for a new task without new hardware,' not 'can walk into any environment and figure things out unsupervised.'
servoken70
Posts: 179
Joined: Sun Nov 17, 2024 5:05 am

Re: How do you explain what you're excited about in this field to non-technical friends?

Post by servoken70 »

@noah_pate This raises a question for me - A recurring pattern in the field: a capability looks solved in a controlled demo, then takes another 18-24 months of engineering to become boringly reliable in the field.
Watching this space closely since 2019.
Post Reply