How do you explain what you're excited about in this field to non-technical friends?
-
sharonschmidt
- Posts: 174
- Joined: Mon Sep 30, 2024 7:31 am
How do you explain what you're excited about in this field to non-technical friends?
Been meaning to post this for a while.
Most flashy demo reels involve some amount of teleoperation, scripted sequencing, or cherry-picked takes - that's not necessarily dishonest, but it does mean the gap between 'demoed' and 'reliably autonomous in production' is still large. The 'humanoid' form factor mostly wins on infrastructure compatibility, not raw efficiency - stairs, doors, and tools were all built for a human body plan, so a legged, two-armed robot slots into existing spaces without retrofitting them. Open-source humanoid projects matter less for out-competing the well-funded players and more for keeping the barrier to entry low enough that new ideas and new people can actually get into the field.
Anyone want to poke holes in this?
Ex-automotive, now full-time robots.
-
jonathan.rao1
- Posts: 156
- Joined: Fri Dec 20, 2024 7:58 pm
Re: How do you explain what you're excited about in this field to non-technical friends?
I see it a little differently.
The uncanny valley matters a lot less in a warehouse than in a living room - nobody cares if a picking robot looks a little stiff, but a home-companion robot with a slightly-off gait reads as unsettling fast.
Currently: 3D printing my way to bankruptcy.
Re: How do you explain what you're excited about in this field to non-technical friends?
@jonathan.rao1 Small correction on one detail:
Elder care is one of the most emotionally appealing use cases and also one of the hardest, because it demands both physical safety around fragile people and social/communication skill that's still far behind the manipulation hype.
"The best actuator is the one that doesn't overheat."
Re: How do you explain what you're excited about in this field to non-technical friends?
@rossi30 Just to be precise about one thing:
A lot of the current wave genuinely is repackaged 2000s and 2010s research (ZMP walking, whole-body control, DARPA-era grasping) combined with two things that weren't available then: cheap high-torque-density actuators and large-scale learned policies.
she/her
Re: How do you explain what you're excited about in this field to non-technical friends?
Ran into exactly this myself.
The labor-substitution narrative gets simplified a lot in pitch decks; the more honest framing right now is 'augmenting understaffed, high-turnover roles' rather than wholesale replacement. The safety case for humanoids working near people usually leans on compliant/backdrivable joints plus soft force limits, but there isn't yet a mature, widely-adopted standard equivalent to what industrial arms have had for decades.
she/her
Re: How do you explain what you're excited about in this field to non-technical friends?
@scott21 I'll believe the stronger version of that claim when it's independently verified.
Automotive plants ended up as the first serious proving ground for humanoids mostly because they already have structured environments, safety processes, and budget for automation - not because car assembly is uniquely suited to bipeds.
Opinions my own, not my employer's.
-
camila.jackson0
- Posts: 225
- Joined: Wed Oct 09, 2024 1:27 am
Re: How do you explain what you're excited about in this field to non-technical friends?
@barbara50 I'd frame this differently.
Roughly 7,000-8,000 commercial humanoids are estimated to be operational worldwide as of mid-2026, which sounds like a lot until you compare it to the millions of industrial arms already installed. Legs earn their keep specifically where the environment wasn't redesigned for robots - stairs, curbs, uneven yards, cluttered floors - which is a smaller slice of real-world tasks than the marketing suggests.
Building > buying.
Re: How do you explain what you're excited about in this field to non-technical friends?
@camila.jackson0 Just to be precise about one thing:
Wheeled-torso designs solve 90% of warehouse and light-industrial tasks with far less complexity than a biped, which is exactly why so many 'humanoid' demos quietly have wheels under a skirt.
"The best actuator is the one that doesn't overheat."
Re: How do you explain what you're excited about in this field to non-technical friends?
@richard36 Pretty much this. One thing to add:
'General purpose' in 2026 mostly means 'can be reprogrammed for a new task without new hardware,' not 'can walk into any environment and figure things out unsupervised.'
-
servoken70
- Posts: 179
- Joined: Sun Nov 17, 2024 5:05 am
Re: How do you explain what you're excited about in this field to non-technical friends?
@noah_pate This raises a question for me -
A recurring pattern in the field: a capability looks solved in a controlled demo, then takes another 18-24 months of engineering to become boringly reliable in the field.
Watching this space closely since 2019.